Page 11 - 尚川精机2017-QMCS

TY型夹模器
TY TYPE DIE CLAMP OF SUNZUANT Q.M.C.S.

此型夾模器以杠桿原理作用，夾持模沿，並不需“U”溝，因此有更寬廣的適用範圍。
Because this lever-type clamp does not require a U-cut on the die shoe, it may be used in a wide range of
applications. The base of the clamp is machined to fit the T-slot on the bolster. The flange-mount model
clamp may be bolted onto the bolster. The automatic slider model makes remote control possible.

◎ 規格特性 / Specifications

結構剖面 Construction
安全行程為全部行程與夾模行程之差值，為特別的安全預留量。
»
Extra Stroke is the difference value between full stroke and clamping stroke
with the extra space for safe operation.

型號 Model TY-2 TY-4 TY-6 TY-10 TY-16 TY-25

夾持力 (於油壓250Kg/cm²)tons Clamping Force(at 250Kg/cm²) 2 4 6.3 10 16 25
全部行程 (X)mm Full Stroke mm 7 7 8 8 8 8
夾模行程 (Y)mm Clamping Stroke mm 2 3 4 3 3 3
安全行程 (Z)mm Extra Stroke mm 5 4 4 5 5 5
夾模器缸體容量 (全行程)cc Cylinder Capacity at Full Stroke cc 6.5 13.2 22.3 37 61 93

◎ 外型尺寸 / Outline Dimensions

N Clamping Stroke J L K F G “T”槽尺寸 +1
夾模行程 A -0 10
S
D +0.25 -0.25
E
全部行程 Full Stroke 安全行程 Extra Stroke P C +1
h R -0
2-PT
+1
B -0

型號 型號 選用泵浦
Model MIN.E F G J K L MAX.N P R MIN.S PT MIN.C Model A B C D Power units model
TY-2 59 65 28 22 85 107 10 12.5 48 27 1/8 9.5 TY-2 22 37 16 24
SP6308U-□-□
TY-4 85 87 40 30 120 150 10 16 58 33 1/4 12 TY-4 22 37 16 24
TY-6 94 97 44 34.5 133 167.5 11 20 68 40 1/4 14 TY-6 28 48 20 28
TY-10 105 110 50 30 165 195 11 20 82 53 1/4 16.5 TY-10 28 48 20 28
TY-16 120 125 60 35 200 235 12 20 96 67 1/4 19 TY-16 28 48 23 28 SP1014U-□-□
TY-25 133 155 73 35 240 275 13 20 110 81 1/4 22 TY-25 36 56 25 28

註：模沿厚度(h)及T槽(A.B.C.D.)尺寸如為既有(特殊)尺寸，請於訂購時確認之。
»
before purchase, please verify mold edge thickness (h) and T Slot (A.B.C.D.) as standard or special dimensions.