Page 12 - 尚川精机

尚川快速换模系统之TX型夹模器
SUNZUANT Q.D.C.S. TX DIE CLAMP

此型夾模器具節省空間的好處，但模沿須有“U”溝供其夾持，其底部被制成適合在台盤“T”槽滑動
This compact piston-type clamp is space-efficient. It requires U-cuts on the die shoe, The leg of the clamp is
machined to fit the T-slot on the bolster. The automatic slider model makes remote control possible.

◎ 規格特性 / Specifications

結構剖面
Construction “T槽”T-slot
模沿“U”形溝 U-cut

安全行程為全部行程與夾模行程之差值，為特別的安全預留量。
»
Extra Stroke is the difference value between full stroke and clamping stroke
with the extra space for safe operation.

型號 Model TX-2 TX-4 TX-6 TX-10 TX-16 TX-25
夾持力(於油壓250Kg/cm²)tons Clamping Force(at 250Kg/cm²) 2 4 6.3 10 16 25
全部行程(X)mm Full Stroke mm 8 8 8 8 8 8
夾模行程(Y)mm Clamping Stroke mm 4 3 3 3 3 3
安全行程(Z)mm Extra Stroke mm 4 5 5 5 5 5
夾模器缸體容量(全行程)cc Cylinder Capacity at Full Stroke cc. 6.5 13 21 32 54 84

◎ 外型尺寸 / Outline Dimensions

Ø E
+1
A -0
PT
F
11 K D +0.25 -0.25
全部行程 Full Stroke 安全行程 Extra Stroke h ØG C +1 -0

A D
+1
C B -0
夾模行程 Ø H
Clamping Stroke B

型號 型號 選用泵浦
Model E F G H K MIN.C PT Model A B C D Power units model
TX-2 49 52 18 38 12 8 1/8 TX-2 22 37 16 24
SP6308U-□-□
TX-4 68 60 25 59 15 10 1/4 TX-4 22 37 16 24
TX-6 78 65 30 64 16 14 1/4 TX-6 28 48 20 28
TX-10 98 71 40 79 16 17 1/4 TX-10 28 48 20 28
TX-16 127 78 50 88 16 20 1/4 TX-16 28 48 23 28 SP1014U-□-□
TX-25 148 100 60 98 15 23 1/4 TX-25 36 56 25 28

» 註：模沿厚度(h)及T槽(A.B.C.D.)尺寸如為既有(特殊)尺寸，請於訂購時確認之。
before purchase, please verify mold edge thickness (h) and T Slot (A.B.C.D.) as standard or special dimensions.