Page 23 - 尚川精机

快速换模系统之DL型油压式举模器(滚轮型)
SUNZUANT Q.D.C.S. DL DIE LIFTER(ROLLER TYPE)

DL型油壓式舉模器以油壓方式舉模，有強力舉模能力適合模具重量變化差異大時使用。
The hydraulic DL DIE LIFTER withstands heavy load weights and abuse. The scrap guard/scrapers keep the
roller surfaces free from scraps. The rollers are arrayed in closer pitches to prevent damage to the bottom of
heavy dies.
The height of the roller can be adjusted by removing some of the built-in shims with different thicknesses.

◎ DL-50 / Model
12.5 L-25 12.5

32
油管
檔塊 25 洩氣口 Vent 25 Oil Pipe
Fixture
50 100 100 100 100 100*n 100 100 100 50
L
防塵蓋 滾輪 49±0.1
Dust Keeper Roller
50 -0 -0.1
13 M6(附帶水平墊片) 油壓缸
M6(Leveling Shim Provided) Cylinder 入油孔1/8"PT
4-M8*55 60 P1 P1 …P2…P3 Pn 60 Oil Inlet
附帶品
Provided +0.25 30 +0
+0.1
50 +0.5
1 3 2
53 +0.5 +0

“U”型槽尺寸 自然狀態 作用時上升
U-slot dimensions Down Lifted

長度(L) 滾輪數 載模能力(kgf) 油壓缸(kg) 油壓缸距離(mm)
規格(Model)
Overall Roller O'ty Load Cap Lift Cylinder Lift Cylinder Pitch
L SS41 S45C 丁數Pcs 舉模力(kgf) P1 P2 P3 P4 P5 P6 P7
Lift Cylinder
DL50-400 400 4 1000 1750 2 2200 280 22
DL50-500 500 5 1200 2100 2 2200 90 290
DL50-600 600 6 1400 2450 3 3300 90 330 60
DL50-700 700 7 1600 2800 3 3300 140 340 100
DL50-800 800 8 1800 3150 4 4400 170 390 120
DL50-900 900 9 2000 3500 4 4400 210 400 170
DL50-1000 1000 10 2200 3850 5 5500 125 125 410 220
DL50-1100 1100 11 2400 4200 5 5500 150 150 400 380
DL50-1200 1200 12 2600 4550 5 5500 150 150 400 380
DL50-1300 1300 13 2800 4900 6 6600 150 150 200 400 280
DL50-1400 1400 14 3000 5250 6 6600 150 150 200 400 380
DL50-1500 1500 15 3200 5600 7 7700 150 150 200 300 300 280
DL50-1600 1600 16 3400 5950 7 7700 100 150 250 400 300 280
DL50-1700 1700 17 3600 6300 8 8800 100 100 150 250 300 300 380
DL50-1800 1800 18 3800 6650 8 8800 100 100 150 250 300 300 480

» 註：SS41, S45C為模具材質，訂購時，如有下料孔請附台盤藍圖。
SS41, S45C is die material. When you purchase, please attatch bolster plate diagram for correct size of waste material hole at the bottom.